﻿Change Logs
Version-5.8.3
1. Update the slicing configurations for Adventurer 5M and Adventurer 5M Pro.
2. Correct some Japanese translation errors.
3. Modify the upper limit values of the chamber temperature and cooling area threshold.
4. Other function optimization and bug fixes.

Version-5.8.2
1. Adventurer 5M supports camera-related functions.
2. Dimensional Adjustments function is turned off by default.
3. Other function optimization and bug fixes.

Version-5.8.1
1. When the max flow rate function is enabled, the retraction speed is not limited.
2. Optimize the small-area infill reinforcement function and fix some related bugs.
3. Fix the issue that the cooling fan does not start when printing with the left extruder for some machine models.
4. Fix the issue of slicing failure in the vase mode under certain circumstances.
5. Other function optimization and bug modification

Version-5.8.0
1. Add the "Gap to Model" parameter for the brim.
2. Support enabling brim based on the contact area between the model and the build plate.
3. Add pre-extrusion at the edges.
4. Add the model splitting function.
5. Support setting the infill density of small areas separately.
6. Add the maximum flow rate parameter.
7. Other function optimization and bug modification.

Version-5.7.2
1. Add two new machine types: Adventurer 5M and Adventurer 5M Pro.
2. Update the slicing configuration of Guider 3 Ultra.
3. Other function optimization and bug modification.

Version-5.7.1
1. Modify the maximum exterior speed limit of Adventurer 4 Series.
2. Fix the compatibility issues with older firmware of Creator 4.
3. Other function optimization and bug modification.

Version-5.7.0
1. Add a new compatible machine type: Guider 3 Ultra.
2. Support limiting the overhang printing speed.
3. Support limiting the printing speed of the part above the linear support.
4. Add the raft function for linear support.
5. Some machine types support setting the acceleration.
6, Support reducing the temperature of the idle extruder during dual-extruder printing.
7. Support setting the retraction parameters separately when switching extruders.
8. Some machine types support setting the linear advance parameters.
9. Support setting the top/bottom layer speed separately.
10. Add the grid infill function.
11. Add Italian.
12. Other function optimization and bug modification

Version-5.6.1
1. Add two new machine types: Adventurer 3 Pro 2 and Adventurer 4 Pro.
2. Other function optimization and bug modification.

Version-5.6.0
1. Update the slicing configurations of Guide 3, Guider 3 Plus and Creator 4.
2. Support loading files in STEP and STP formats.
3. Automatically reconnect the printer after communication is disconnected.
4. Other function optimization and bug modification.

Version-5.5.2
1. Add a new machine type: Guider 3.
2. Update the slicing configuration of Guider 3 Plus and Creator 4.
3. Fix the bug of video surveillance of Adventurer 3 and Adventurer 4.
4. Other function optimization and bug modification.

Version-5.5.1
1. Add some slicing configurations of Guider 3 Plus and Creator 4.
2. Optimize the display color of the model.
3. Optimize the video monitoring function and improve the fluency.
4. Other function optimization and bug modification.

Version-5.5.0
1. Add a new machine model: Guider 3 Plus.
2. Update the default slicing parameters of Creator 4.
3. Fix the bug of abnormal print path when adding support in the mode of printing models one by one.
4. Fix the bug that the linear support cannot be added from the build plate.
5. Other function optimization and bug modification.

Version-5.4.1
1. Fix the extruder temperature setup error bug when printing in copy and mirror mode.
2. Add more slicing settings for Creator 4.
3. Other function optimization and bug modification.

Version-5.4.0
1. Support setting the font size.
2. Support setting the color theme.
3. Support manual designation of the extruder for printing partial support in the support interface.
4. Support viewing the text content of Gcode during slicing preview.
5. Support drawing a translucent nozzle during slicing preview, making it convenient for viewing the current path location.
6. The customized material slicing configuration supports setting the material name and material density (for weight estimation).
7. Add the function of model gallery.
8. Other function optimization and bug modification.

Version-5.3.4
1. When printing in the duplicate mode or in the mirror mode, it will prompt users to add a raft.
2. Add some slicing configurations for Adventurer 4 Series, Creator 3 Pro and Creator 4.
3. Add a new compatible machine model: Artemis.
4. Other function optimization and bug modification.

Version-5.3.3
1. Add a new compatible machine model: Creator Pro T.
2. Add a new compatible machine model: Finder 3.
3. Other function optimization and bug modification.

Version-5.3.2
1. Add a Russian language option.
2. Modify the slicing configuration of Creator 4.
3. Other function optimization and bug modification.

Version-5.3.1
1. Modified the material diameter options for Creator 4.
2. Solved the problem that the software installation gets stuck after installing some versions of NVIDIA drivers under Windows.
3. Other function optimization and bug modification.

Version-5.3.0
1. Add Polish Selection.
2. Add more slicing settings for Creator 4.
3. Modify the material shrinkage compensation parameters.
4. Support setting the parameters related to the shell printing order and the shell starting point.
5. Add the nozzle size selection function in the slicing screen.
6. Other function optimization and bug modification.

Version-5.2.1
1. Add compensation for filament shrinkage.
2. Add more slicing settings for Creator 3 Pro and Creator 4.
3. Add the warning on Creator 4 that double extruder printing out of range.
4. Support setting the cooling fan speed for GuiderII S.
5. Add more new example files.
6. Fix the issue that Z axis compensation failure.
7. Other function optimization and bug modification.

Version-5.2.0
1. Add new profile settings to Adventurer 4 series/Creator 4/Guider II S.
2. Add fuzzy skin function.
3. Optimize the accuracy of printing time estimation.
4. Add Portuguese.
5. Other function optimization and bug modification.

Version-5.1.1
1. Add Creator 4.
2. Add slicer settings on Creator 3 and Guider II.
3. Other function optimization and bug modification.

Version-5.1.0
1. Minority languages added.
2. Z offset function added.
3. Other functions improved and bug fixed.

Version-5.0.0 
1. New interface design.
2. New multi-device management function.
3. New device detail and print control function.
4. Slice preview function improvements.
5. Some slice configuration parameter added.
